Product lineup (For ceramic
ware)
Blight
liquid gold
Product number |
Color tone |
Gold content |
Suitable material |
Firing range*2 |
NOTE |
NR-1101 |
Red |
11% |
Earthenware
Porcelain |
700-800 750-830 |
General |
NR-1100 |
Red |
11% |
〃 |
〃 |
For wide paiting, and preventing pin hole *3 (Gold
contents 8-14 products are also available.) |
NR-1076 |
Red |
11% |
〃 |
〃 |
Gasproof *4
For firing with decal
paper (Gold contents 10% product is also available.)
|
NR-1272 |
Red |
11% |
〃 |
〃 |
Gasproof Stronger than NR-1076 (Gold
contents 10% product is also available.) |
NY-1068 |
Yellow |
10% |
〃 |
〃 |
General for yellowish tone |
BY-1989 |
Yellow |
11% |
New bone *1 |
750-850 |
Special type for firing with color pigment or decal paper under high
temperature |
BY-1181 |
Yellow |
11% |
New bone Bone china *1 |
NZ-1069 |
Dusky red |
8% |
Earthenware
Porcelain |
700-800 750-830 |
Microwave safe (Gold contents 6% product is
available) |
NR-1154 |
Yellow |
11% |
Porcelain |
750-850 |
For firing under high temperature *5 |
NG-1192 |
Blue |
10% |
Earthenware
Porcelain |
700-800 750-830 |
Citron Gold (Gold
contents 12% is available) |
NR-1020 |
Red |
20% |
〃 |
〃 |
Premium item that gold contens is 20%
for high temperature firing |
Half matt liquid gold
Product number |
Color tone |
Gold content |
Suitable material |
Firing range*2 |
NOTE |
NG-8135 |
Blue |
11% |
Earthenware
Porcelain |
700-800 750-830 |
|
NG-8265 |
Blue |
12% |
〃 |
〃 |
|
NG-8321 |
Blue |
13% |
〃 |
〃 |
|
NR-8140 |
Red |
14% |
〃 |
〃 |
|
BY-8264 |
Yellow |
12.5% |
Bone china *1 |
〃 |
Special type for firing with color pigment or decal paper under high
temperature |
NZ-8906 |
Dusky red |
9% |
Earthenware
Porcelain |
700-800 750-830 |
Microwave safe |
NG-8206 |
Blue |
12% |
Earthenware
Porcelain |
700-800 750-830 |
Flake type*6 Half matt
type |
NG-8306 |
Blue |
13% |
〃 |
〃 |
〃 |
NY-8467 |
Yellow |
14% |
〃 |
〃 |
〃 |
NG-8667 |
Blue |
16% |
〃 |
〃 |
〃 |
Matt liquid gold
Product number |
Color tone |
Gold content |
Suitable material |
Firing range*2 |
NOTE |
NR-2218 |
Red |
18% |
Earthenware
Porcelain |
700-800 750-830 |
General type of matt liquid gold
Need to be burnished with "Zircon sand" after firing. (Same as above) |
NR-2200 |
Red |
20% |
〃 |
〃 |
〃 |
NY-2250 |
Yellow |
25% |
〃 |
〃 |
〃 |
NY-2300 |
Yellow |
30% |
〃 |
〃 |
Gold contents 30-50% are also available for this
type. |
NG-2184 |
Blue |
18% |
Earthenware
Porcelain |
700-800 750-830 |
Flake type*6
Burnishing is not necessary.
(Same as above) |
NG-2945 |
Blue |
19% |
〃 |
〃 |
〃 |
NG-2549 |
Blue |
25% |
〃 |
〃 |
〃 |
*1 When
only the gold liquid is decorated and fired to the Newbone or Bone china
picturing putting it, the gold liquid for pottery is usually used. In that case,
it fired at lower temperatures (700-750℃). *2 The firing temperature is
different depending on the condition of the material and the above-mentioned
temperature is just for your referance. Please ask for the
details.
*3 Pinhole-proof type liquid gold is easy to make a brush strokefor decorating
wide area (wide paint) and can prevent pin hole.
*4 Gasproof type of liquid gold
prevents the pyrolysis gas generated from the acrylic film or something of the
decal sheet when the gold liquid and the decal sheet are fired at the same time
from influencing it.
*5 When liquid gold and color
pigment (decal sheet) are fired at the same time at the high temperature because
of the pigment and so on, this type is used. *6 Flake
gold powder type became majestic matt color without burnishing after firing
because this type is made by grinding gold leaf. (It is no problem to be
burnished.)
Platinum liquid,
palladium liquid, silver liquid
Product number |
Name |
Suitable material |
Firing range |
Note |
|
|
|
|
|
NA-3010 |
Platinum liquid |
Earthenware
Porcelain |
700-800 750-830 |
High platinum contests type and the feature is white
color. |
NA-3114 |
〃 |
〃 |
〃 |
General |
NA-3448 |
〃 |
〃 |
〃 |
Low-cost type (Color tone is a little dark) Gassprof |
NA-3823 |
〃 |
〃 |
〃 |
Half matt platinum liquid(Flake type) |
NA-3258 |
〃 |
〃 |
〃 |
Matt platinum liquid(Flake type) |
NZ-3035 |
〃 |
〃 |
〃 |
Microwave safe |
NA-4000 |
Palladium liquid |
Earthenware
Porcelain |
700-800 750-830 |
Blight type |
NA-4321 |
〃 |
〃 |
〃 |
Half matt type (Silver powder-containing
item*8) |
NA-4071 |
〃 |
〃 |
〃 |
Matt
type*7 |
NA-5673 |
Silver liquid *7*8 |
Glass・Earthenware
Porcelain |
550-600 700-800 750-830 |
Silver liquid is available to various material if fired under adaptive
temperature to each material. |
Note: Platinum liquid and palladium liquid are both made by gold,
platinum and palladium.
There is not so big difference
between platinum and palladium liquid color after firing.
Metal compounding ratio and the balance are affect white color. *7 Liquid silver and matt palladium liquid need to be burnished
with "Zircon sand" or "Gold polishing paper"after firing. *8 Silver objects become oxidized and change the color a few months later,
so please burnish with "Zircon sand" again.
Luster liquid (each color)
For luster and other paste,
please check this page Product lineup (Luster
colors) |

Copyright © 2006-2012 NIPPON KIN-EKI Co.,Ltd. all rights reserved. |
|