hFUJIhBRAND Liquid Gold “ú–{‹à‰tŠ”Ž®‰ïŽÐ




Product lineup@iFor printingj

For paste material for printing, transfer printing and direct printing
Transfer printing is a type to print paste gold on the transfer paper, and direct printing is a type to print directly on the ceramic ware and the glassware, etc.
According to the material, we will respectively prepare it for the ceramic wareand for the glass.




For transfer printing


Bright paste gold for ceramic ware

Product number Color tone Gold content Suitable material Firing range*2 NOTE
NU-1862 Yellow 8% Earthenware Porcelain
700-800
750-830
@
NT-1067-1 Red 10% V V @
NW-1005 Yellow 10% V V Corresponding to underlayer
NT-1252 Red 12% V V @
BT-1055 Red 10.5% Bone china*1 750-850 Special type for firing with color pigment under high temperature


Matt paste gold for ceramic ware

Product number Color tone Gold content Suitable material Firing range*2 NOTE
NU-8242 Yellow 12% Earthenware Porcelain
700-800
750-830
@
NU-8414 Yellow 14% V V @
NU-8951 Yellow 15% V V @
NU-2975 Yellow 18% V V @

*1 When only the paste gold is decorated and fired to the Bone china, the paste gold for pottery is usually used. In that case, it fired at lower temperatures (700-750Ž). Special type for firing with color pigment and so on under high temperature(800Žj
*2 The firing temperature is different depending on the condition of the material and the above-mentioned temperature is just for your reference. Please ask for the details.



Paste platinum, white gold, palladium, silver for ceramic ware

Product number Name Suitable material Firing range*2 Note
NC-3079 Paste platinum Earthenware Porcelain
700-800
750-830
@
@@@
NW-4067-3 White gold paste Earthenware Porcelain 700-800
750-830
@
NC-4150 Palladium paste V V @
NC-4477 V V V Matt type*3
@@
NC-5061 Silver*3
paste
GlassEEarthenware Porcelain
560-620
700-800
750-850
Silver paste is available to ceramic ware and glass.
CF-5103 V Earthenware Porcelain 700-800
750-850
Corresponding to IH heater

Note: Paste platinum, white and palladium are both made by gold, platinum and palladium.
There is not so big difference between these colors after firing. Metal compounding ratio and the balance are affect white color.
*3 Paste silver and matt palladium need to be burnished with "Zircon sand" or "Polishing paper"after firing. Also
silver objects become oxidized and change the color a few months later, so please burnish with "Zircon sand" again.



Paste for glass ware iOnly bright typej

Product number Color tone Gold content Suitable material Firing range*2 NOTE
GT-1990 Red 9 Soda glass 560-620 @
GT-1910 Red 10 V V @
GW-1003 Yellow 10 V V @

White gold paste iBright paste type onlyj

Product number Name Suitable material Firing range*2 Note
GW-4007 White gold Soda glass 560-620 @

EPaste silver for glass ware is same as the one for ceramic ware. Please see product number, NC-5061noted above.
@@
Note: White gold paste is made by gold, palladium.
@@@@
*2 The firing temperature is different depending on the condition of the material and the above-mentioned temperature is just for your reference. Please ask for the details.


Luster paste for ceramic and glass ware (Each color))

For luster and other paste, please check this page Product lineup iLuster colors)




For direct printing


Paste for ceramic ware (Gold, platinum, palladium, silver)

Paste for ceramic ware is generally used for transfer printing.
Thus, a special paste for direct printing is not prepared.
When using it for direct printing, please choose any paste for transfer printing and use by adjusting with slow-dry solvent if necessary.



Paste gold for glass ware iBright type onlyj

Product number Color tone Gold content Suitable material Firing range*2 NOTE
GO-1008 Blue 8% Soda glass 560-620 @
GN-1999 Red yellow 9% V V @
GN-1079 Yellow 9% V V No ash attached type
GP-1010 Red 10% V V @
HP-1010 Red 9.5% Crystal glass 500-530 Crystal glass, For low temperature fired glass

Paste platinum for glassiBright type onlyj

Product number Name Suitable material Firing range*2 Note
GB-3278 Platinum paste Soda glass 560-620 No ash attached type
HB-3080 V V V @
GB-3120 V V V @

*2 The firing temperature is different depending on the condition of the material and the above-mentioned temperature is just for your reference. Please ask for the details.








Copyright © 2006-2012 NIPPON KIN-EKI Co.,Ltd. all rights reserved.

“ú–{‹à‰tŠ”Ž®‰ïŽÐ “ú–{‹à‰tŠ”Ž®‰ïŽÐ